Whisper Flex 2 Soft Peach Housing Ring: Swap Steps

Confirm the part and the fan before you start

This guide covers the Fan Housing Ring + Blade Screw for Whisper Flex 2 (Smart) in Soft Peach, catalog product ID 2553148. The supplied record lists it as suitable for DXCF100 types, so check that model reference on your fan before you loosen anything. If your fan is not a DXCF100, stop here: the supplied information does not confirm fit for other models.

The part is a housing ring plus a blade screw, not a complete fan assembly. The record does not include a step-by-step service procedure, torque values, or tool requirements, so the steps below stay within what the evidence supports and flag where you should pause rather than guess.

What the Soft Peach kit contains

• Fan Housing Ring + Blade Screw Whisper Flex 2 Soft Peach: Fan Housing Ring + Blade Screw for Whisper Flex 2 (Smart) in the color Soft Peach. This is the exact kit you are fitting; the color match matters if the ring is visible on your fan.

  

• Fan Housing Ring + Blade Screw Whisper Flex 2 Soft Peach: Suitable for the following types: DXCF100. Use this as your compatibility checkpoint before ordering or disassembling.

A careful swap sequence for the housing ring and blade screw

The supplied record does not include manufacturer disassembly instructions. Treat the sequence below as a logical order for handling the two supplied components, and stop if anything does not align with your fan.

1. 1. Power down and set up a clear workspace: Unplug the fan and work on a clean, flat surface so the blade screw and ring do not roll away. The supplied information does not specify any waiting period or lockout step, so use your normal appliance safety routine.
2. 2. Verify the model reference: Look for DXCF100 on your Whisper Flex 2 (Smart). This is the only type the supplied record confirms for this Soft Peach kit.
3. 3. Compare the new ring with the old one: Place the Soft Peach housing ring beside the existing ring and check the mounting points and overall shape before removing anything. The record does not list dimensions, so a visual comparison is your practical check.
4. 4. Remove the old ring and keep the blade screw accounted for: The kit includes a blade screw, so set the new screw aside in a tray while you work. The supplied record does not describe the removal method; use the approach that matches how your ring is actually fastened.
5. 5. Fit the Soft Peach ring: Seat the new ring in the same orientation as the old one. Do not force it: if the mounting points do not line up, recheck the model reference rather than modifying the part.
6. 6. Fit the blade screw and check movement: Install the supplied blade screw and turn the blade by hand before powering on. The record gives no torque specification, so tighten only as far as the fitting allows without straining the parts.
7. 7. Run a short check: After plugging back in, listen for rubbing or unusual vibration at low speed. If something sounds wrong, power down and recheck the ring seating and screw fit.

Checkpoints that tell you to pause

• Your fan is not marked DXCF100: The supplied compatibility evidence covers only DXCF100, so fit on another type is not confirmed.
• The new ring does not sit flush: Stop and compare it with the old ring. Forcing a housing ring can stress the part; the record does not support modification.
• You expected a full housing assembly: This kit is a ring plus blade screw. The supplied record does not confirm that it includes other housing components.

What this Soft Peach kit does not confirm

The supplied record does not state materials, dimensions, screw thread size, or a recommended replacement interval. It also does not confirm fit beyond DXCF100. If your decision depends on one of those details, treat it as unconfirmed rather than assuming the part will work.

At a catalog price of USD 11.09 against a comparison price of USD 14.99, this is a low-cost way to restore the Soft Peach finish and replace the blade screw together. The trade-off is that you are buying a specific spare, not a universal one: the color and model match are the point, so order only after the DXCF100 check.

Catalog context for your order

• Fan Housing Ring + Blade Screw Whisper Flex 2 Soft Peach: Catalog price: USD 11.09 (comparison price USD 14.99). Gives you the current catalog context without treating it as a permanent or promotional price.
• Fan Housing Ring + Blade Screw Whisper Flex 2 Soft Peach: Available variant: Standard. The supplied variant evidence lists a single Standard option, so color and fit come from the product record itself.