Before You Start: Confirm Your Fan Model
The Duux Motor Whisper Flex 2 Smart in Soft Peach is a replacement motor designed specifically for the Whisper Flex 2 (Smart) fan. It is compatible with model type DXCF100. Before ordering, locate the model number on your fan (usually on a label near the base or motor housing) to confirm it is a DXCF100. Using the wrong motor can cause fit or performance issues.
What the Replacement Motor Includes
- Motor Whisper Flex 2 Smart Soft Peach: The Duux Motor Whisper Flex 2 Smart in Soft Peach is a replacement motor designed for the Whisper Flex 2 (Smart) fan. It is suitable for use with the DXCF100 model. Color: Soft Peach. SKU: DXSP401. This confirms the exact part needed for a DXCF100 fan. The Soft Peach color matches the original fan housing, so the replacement looks consistent.

Motor Whisper Flex 2 Smart Soft Peach
Motor Replacement Steps
The following steps are based on general safe practice for replacing a fan motor. Specific instructions for the Whisper Flex 2 Smart are not supplied, so proceed with caution and consult your fan’s manual if available.
- 1. Unplug the fan and allow it to cool: Safety first: disconnect the fan from the power source to avoid electrical shock. Wait a few minutes if the fan has been running.
- 2. Remove the fan blade and front grille: Most Whisper Flex models have a removable front grille secured by a ring or screws. Remove the blade carefully to access the motor housing.
- 3. Disconnect the motor wiring: Locate the wiring harness connecting the motor to the fan’s control board. Note the wire positions (take a photo) before disconnecting.
- 4. Remove the old motor: Unscrew the mounting bolts or brackets holding the motor in place. Lift the old motor out. The Duux replacement motor (DXSP401) is a direct fit for DXCF100 models.
- 5. Install the new Soft Peach motor: Position the replacement motor in the housing, align the mounting holes, and secure with the original screws. Reconnect the wiring according to your photo.
- 6. Reassemble the fan: Replace the fan blade, front grille, and any other removed parts. Ensure all fasteners are tight. Plug the fan in and test at low speed before full use.
What the Supplied Information Does Not Cover
The product record does not include a wiring diagram, torque specifications for screws, or detailed disassembly steps for the Whisper Flex 2 Smart. If you are unsure about any step, consider contacting Duux support or a qualified technician. The replacement motor is a mechanical part; electrical work carries risk if not done correctly.

