Whisper 2 Remote Control Gray: Pairing and Functions
By Duux | The Flow of Comfort | Published: 2026-10-20
Category: How-to Guides
Learn how to pair and use the Duux Whisper 2 remote control gray. This guide covers setup, functions, and replacement tips for your fan.
Quick answer
Pair your Duux Whisper 2 remote control gray by inserting the included battery and pointing it at the fan within 3 feet. The remote controls fan speed, oscillation, timer, and power.
What the remote controls
The Whisper 2 remote control gray works exclusively with the Duux Whisper 2 fan (model DXCF27). It gives you full control over fan speed (low, medium, high), oscillation, timer settings (1, 2, 4, or 8 hours), and power on/off. The remote uses infrared signals, so you need a clear line of sight to the fan's receiver.
When to replace the remote
If your original remote is lost, damaged, or the buttons stop responding, the Whisper 2 remote control gray is a direct replacement. It comes with a battery included, so you can start using it immediately. Note that this remote is not compatible with other Duux fan models like the Whisper Flex or Whisper 3.
How to pair and use the Whisper 2 remote
- Insert the battery: Remove the battery tab from the remote. The included battery is already inside. If the remote is unresponsive, check that the battery is seated correctly with the + and - signs aligned. A common mistake is leaving the protective tab in place—remove it completely.
- Point the remote at the fan: Stand within 3 feet of the Whisper 2 fan and point the remote directly at the front of the fan. The infrared receiver is located behind the grille. Press the power button to test. If the fan doesn't respond, move closer or check for obstacles between the remote and the fan.
- Test all functions: Press each button once: power, speed (cycle through low, medium, high), oscillation, and timer (1, 2, 4, or 8 hours). Confirm the fan responds to each command. If a specific function doesn't work, the remote may need replacement—try fresh batteries first.
Product details
- Whisper 2 Remote Control Gray: Comes with a battery included, ready to use when it arrives. You don't need to buy a separate battery—just remove the tab and pair it with your Whisper 2 fan.
Whisper 2 Remote Control Gray
