The leg set that keeps your Edge fan standing firm
If your Duux Edge fan wobbles, tilts, or no longer sits level, the problem may be worn or missing support legs. Edge Support Legs are the replacement part designed to restore a stable base. This guide explains what the set includes, which models it fits, and how to decide whether it is the right fix for your fan.
Unlike generic fan accessories, this is a specific spare part for the Edge series. That means compatibility is the first and most important check before you buy.
What the Edge Support Legs set actually contains
- Edge Support Legs: The set consists of four parts that together form the two legs. You get both legs in one pack, so a single order replaces the full support base rather than just one side.

Edge Support Legs - Edge Support Legs: Compatible with DXCH10, DXCH11, DXCH12, DXCH13, DXCH14, and DXCH15. These model numbers cover the Edge fan range. Check your fan’s label or manual to confirm it matches one of these before ordering.
Why fan stability legs matter more than you think
A fan that does not sit flat can rattle, vibrate, or creep across a desk or floor. Over time, that movement can stress the housing and make the fan noisier. Replacing the support legs is a simple way to restore the intended footing without replacing the whole appliance.
Edge Support Legs are designed for use with the Edge product, so they match the mounting points and load-bearing needs of that specific fan. Using improvised supports may not provide the same stability.
Before you order: a quick compatibility check
- Find your fan’s model number: Look on the rating label, usually on the base or back of the fan. It will start with DXCH. The Edge Support Legs fit DXCH10, DXCH11, DXCH12, DXCH13, DXCH14, and DXCH15 only.
- Confirm you need the legs, not another part: If the fan is unstable because of a damaged base or missing screws, the legs alone may not solve it. This set provides the two legs (four parts total). It does not include other fasteners unless stated.
- Check the quantity: One set gives you two legs. If you are replacing legs on a single fan, one set is normally enough. For multiple fans, order one set per fan.
When a support leg replacement is the right call
Replace the legs if they are cracked, bent, missing, or no longer hold the fan level. Visible damage or a fan that rocks even on a flat surface are clear signs. If the legs look fine but the fan still wobbles, check that all four parts are correctly seated and that the surface is even.
This is a buying guide, not a repair manual. The supplied product information does not include fitting instructions, so refer to your fan’s manual or contact Duux support for guidance on installation.
The part at a glance
- Edge Support Legs: Brand: Duux. SKU: DXSP177. Genuine Duux part, so you can be confident it is made for the Edge fan rather than a universal substitute.
- Edge Support Legs: Catalog price: USD 17.24 (comparison price USD 24.99). A modest cost compared with replacing a fan, making this a sensible first fix for stability issues.
What this guide cannot confirm
The supplied information does not specify the material, colour, or exact dimensions of the legs, nor does it include fitting steps or safety instructions. If you need those details, check the product listing or ask Duux directly. This article sticks to what is confirmed so you can make a confident compatibility decision.

