Back to Blog
Tips & Care 2026-11-16 Duux | The Flow of Comfort 10 views

Blizzard Float Sensor and Side Filter Frame: Care FAQ

Blizzard Float Sensor and Side Filter Frame: Care FAQ

A practical care guide for Duux Blizzard owners: identify the right float sensor and side filter frame, spot common problems, and know when replacement makes sense.

Start with the model number, not the symptom

If your Blizzard air conditioner is behaving oddly—or you are ordering a replacement part—the first thing to check is the model code on the unit. The two parts covered here fit different sets of Blizzard types, so guessing from the outside of the machine can lead to the wrong purchase.

The Float Sensor Blizzard (SKU DXSP047) is listed for Blizzard types DXMA02, DXMA03, DXMA04 and DXMA05. The Side filter frame Blizzard (SKU DXSP099) is listed for Blizzard 10K and 12K BTU units, suitable for types DXMA04 and DXMA05. If your model code is not in those lists, the supplied information does not confirm a fit.

What each replacement part is confirmed to fit

  • Float Sensor Blizzard: Float Sensor Blizzard is suitable for Blizzard types DXMA02, DXMA03, DXMA04 and DXMA05. This is the broadest fit list of the two parts, so it covers more Blizzard models—but it still stops short of every unit.
    Float Sensor Blizzard
    Float Sensor Blizzard
  • Side filter frame Blizzard: Side filter frame Blizzard is compatible with Blizzard 10K/12K BTU units and suitable for types DXMA04 and DXMA05. If you own a smaller or larger BTU model, the supplied record does not confirm this frame will fit.
    Side filter frame Blizzard
    Side filter frame Blizzard

Float sensor problems: what you can and cannot diagnose from the listing

A float sensor is a replacement part, and the catalog entry confirms its name, brand, SKU and compatible Blizzard types. What the supplied information does not include is a troubleshooting procedure, error-code list or step-by-step test for the sensor. That means you should not treat this article as a repair manual for a specific fault.

What you can do is confirm the model code before ordering. If your Blizzard is a DXMA02, DXMA03, DXMA04 or DXMA05, the Float Sensor Blizzard is the part the catalog identifies for that range. If your unit shows a different code, the supplied evidence does not confirm compatibility, so check with Duux support before buying.

Side filter frame care: cleaning versus replacement

The Side filter frame Blizzard is a replacement frame, not a filter cartridge. The catalog does not provide cleaning instructions, so this guide cannot tell you how to wash or maintain it beyond general care. What it does confirm is the fit: Blizzard 10K and 12K BTU units, types DXMA04 and DXMA05.

If the frame itself is cracked, warped or no longer holding the filter correctly, replacement is the straightforward path—provided your model matches. If the frame is intact and the issue is airflow or dust, the frame may not be the problem at all; the supplied information does not cover filter cleaning schedules or performance symptoms.

A sensible order before you order either part

  • Find the model code: Look for the DXMA number on your Blizzard unit. This single step decides whether either part is confirmed to fit.
  • Match the part to the code: Float Sensor Blizzard: DXMA02, DXMA03, DXMA04, DXMA05. Side filter frame Blizzard: DXMA04 and DXMA05 only, on 10K/12K BTU units.
  • Decide whether you need a part or a conversation: If the symptom is unclear and the model does not match, do not order on hope. The supplied records do not include diagnostic steps, so contact Duux support for guidance.
  • Keep the SKU handy: DXSP047 for the float sensor, DXSP099 for the side filter frame. These make it easier to confirm you are ordering the same part again.

When the supplied information is not enough

This article is built from the catalog records for these two parts. It does not include installation steps, sensor testing procedures, cleaning methods or error-code meanings for the Blizzard range. If your question is “why is my float sensor not working” rather than “which sensor fits my model,” the honest answer is that the supplied information cannot diagnose the cause.

Use the model-code check as your first filter. If the code matches and you have confirmed the part you need, the catalog gives you a clear replacement option. If the code does not match, or you are unsure whether the fault is the sensor or something else, pause the order and ask Duux support before spending money on a part that may not be the right one.

Related Articles

Customer Service
Home
Products
Cart
Profile